Semi-Stationary Steam Fire Extinguishing System

Patent No.: ZL201621087066.X

Keywords:

firefighting equipment

Category:

Steam Fire Extinguishing System

E-mail:

888@singll.com

Request a Quote Now

Detailed introduction

用途: Extinguishing fires or diluting leaked flammable, toxic, and hazardous gases
Firefighting-specific for petrochemical enterprises

用途: Extinguishing fires or diluting leaked flammable, toxic, and hazardous gases

Scope of application:

① Install in an indoor area with a sufficient steam source

● Class A, B, and C pump rooms and factory buildings within petrochemical enterprises

● Class A and Class B Gas Compressor Rooms

● Oil- and gas-fired boiler rooms with a single-unit evaporation capacity of ≥2 t/h

● Other spaces with good containment, suitable for steam-based fire suppression

② Installed outdoors with an ample steam source

● Class A, B, and C equipment areas within petrochemical facilities, such as on multi-story framework or tower platforms

● Equipment handling gases or liquids at or above their autoignition temperature

● Near vulnerable leakage points of toxic or flammable equipment within petrochemical facilities (for dilution or fire suppression)

Product features:

● The steam source used as a fire-extinguishing medium is low-cost and can be reused multiple times.

● Utilizing the powerful pressure of steam, it envelops the ignition source, swiftly smothering and extinguishing the fire. It’s non-toxic and won’t damage equipment.

● Complete equipment set, simple to install, operate, and maintain; highly mobile, flexible, and convenient for quick deployment

● All pipelines, valves, pressure gauges, and spray guns are made from stainless steel, offering exceptional corrosion resistance.

● The equipment is fully equipped, features a compact design, and includes anti-static measures.

● JOTUN paint, lasting three years without fading

Main technical specifications

Technology Parameters	Model	QSG15/20-0.8	QSG20/20-1.6
	Nominal specification (mm)	DN20PN0.8MPa	DN20PN1.6MPa
	Nominal flow rate (kg/s • 0.4 MPa • 150°C)	≥ 0.05
	Inlet (System) Pressure (MPa)	≤ 0.8	≤ 1.6
	Work pressure range (MPa)	0.3–0.6
	Effective range (m at 0.5 MPa)	≥ 5
	Steam Temperature (℃)	≤ 320
Each set Configuration	① Insulated Stainless Steel Steam Gun	1 unit
	② DN20 PN2.5 Imported High-Pressure Heat-Resistant Long/Short Rubber Hose	15m/0.7m	20m/0.7m
	③ DN20 PN1.6 Stainless Steel Shut-off Valve	1 unit	2 units
	④ Stainless steel drain valve DN20 PN1.6	1 unit
	⑤ Stainless Steel Steam Pressure Gauge	1 piece	2 pieces
	⑥ Stainless steel flanged short pipe DN20 PN1.6	Group 1	Group 2
	⑦ Steam Pressure Reducing Valve DN20 PN1.6	—	1 unit
	⑧ Outdoor rainproof enclosure with base and reel	1 set
	⑨ION-STICK Type Electrostatic Collector	1 set